Logmore's QR codes are just like any other QR's and can be scanned with the same tools utilized for other QR codes.
You need to scan a QR code on the logger to upload the data to the Cloud. Only after scanning you will be able to review and analyze the collected measurements.
Here you can find detailed guides for different scanning devices, including Scanpoint and Mass scan features for high-volume operations:
Logmore QR Scanner app (for Android)
Scanning with a PC / Mass scan
General instructions
1️⃣ Scan the QR code with your smartphone
2️⃣ Click the notification link that appears on the screen
3️⃣ Allow the use of location data when asked
You will receive a pop-up notification asking you to allow sharing the location. Allowing this is highly recommended. Logmore Cloud only uses the location data to save the scan on the map.
4️⃣ Data is now uploaded to Logmore Cloud
❗ If needed, scan also the history QR codes or refresh the screen
If you've noticed in Logmore Cloud that the data status is incomplete, you have to go through several troubleshooting actions to get the missing data:
- refresh the screen by pressing the multi-use button once
- scan History QR codes
- go through the Frozen screen troubleshooting (if the logger was exposed to cold temperatures)